Search results for: 'concrete nails'

Flooring Nails are recommended for laying tongue and groove hardwood flooring.

Do not use this nail for face-nailing softwood flooring because the head is too small. Available Hardened in Standard Finish or Hot-Dip Galvanized.

All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont nails are proudly manufactured and packaged in Mansfield Massachusetts. 

Blind Nailing

Nailing at a 45 degree angle from the butt-end of the board, which may be flat-surface, ship-lap, or tongue-and-groove. Nails used in this fashion usually have small heads and are not visible when the installation is completed. Also called toe-nailing, the sole purpose of nailing in this manner is functional rather then aesthetic. 

Determine the nail spacing requirements for your hardwood flooring, based on the width of the floorboards. Boards 2 to 2 3/4 inches wide need one nail every 8 to 10 inches. Boards 3 to 3 3/4 inches wide require a nail every 6 to 8 inches. Boards 4 to 7 inches wide need one nail every 6 inches

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects.

Common Nails are popular for framing, roughing in, and face-nailing floors.

Also used for cabinet work, interior and exterior siding, furniture repair, batten doors, and paneling. We highly recommend hot-dip galvanized for exterior applications. Available in Standard Finish, Hot-Dip Galvanized, and in select sizes, Black Oxide Finish. 

All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts. 

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Not sure which nail is right for you, request a sample here.

Slating Nails are used to fasten slate roofing and has a larger head than most cut nails.

Can be used in any application where a larger head is desired. Available in Standard Finish only.

All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. All of our nails are proudly manufactured and packaged in Mansfield Massachusetts. 

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Shingle Nails have blunt points to reduce wood splits.

Available in Standard Finish and Hot-Dip Galvanized. 

All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. All of our nails are proudly manufactured and packaged in Mansfield Massachusetts. 

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Common Rose-Head Nails are popular for framing, roughing in, and face-nailing floors.

Also used for cabinet work, interior and exterior siding, furniture repair, batten doors, and paneling. We highly recommend hot-dip galvanized for exterior applications. Available in Standard Finish and Hot-Dip Galvanized. 

All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts. 

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

All 20 Tremont Nails on a wooden display.

This is the wooden version of our popular Sample Set, containing the 20 varieties of Tremont Cut Nails. each nail is mounted in an individual slot and can be removed for viewing  and inspection.

The birch laminate display board also contains the complete history of cut nails in America. 

A Print from an original pencil drawing of our nail machines. 

In the late 1700's, the first machine to cut and head a nail in one operation was invented by Ezekiel Reed of Bridgewater, MA.

An authentic century-old nail machine, drawn in pencil and printed by our own artist Erik Michelson, captures the detail and charm of the machines still used in our Mansfield, MA factory. Available in print only (11" x 14")

Mounted on card stock, the set includes all twenty of the Tremont cut nails as well as a the history of nal making and other descriptive materials.

The set can be mounted for quick reference. Ideal for the home craftsman or history buff. 

Common Siding Nails are used in wood fences and applying siding over sheathing.

Although very similar to our Common Nail, Common Siding are made from a low-carbon steel. Hot-Dip Galvanized nails are recommended for exterior applications. Available in Standard Finish and Hot-Dip Galvanized.

All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length.

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Clinch Rose-Head Nails have a button head and are malleable enough to be clinched.

Often used for furniture repair, cabinet work, interior walls, face-nailing wide board flooring, batten door construction, paneling, and for countertops. Available in Standard Finish, Hot-Dip Galvanized, and in select sizes, Black Oxide Finish. 

All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts. 

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

Clout Nails are similar in design to Shingle Nails but made from lighter gauge steel. Useful for box and crate construction and for the application of thin siding and paneling. Clout Nail are also used in furniture repair, cabinet work, batten doors, and countertops. Available in Standard Finish only. All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. All of our nails are proudly manufactured and packaged in Mansfield Massachusetts. 

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

Not sure which nail is right for you? Chose which one's your considering and we will send a samples of each selection to you.

If one of the items are out of stock we will substiute a similar size nail of the same type. One sample request per order..

We also sell sample boards with a brief history of nail making with a version of each nail, check them out in our Nail Accessories & Specialty Items.  

Hinge Nails are ideal for fastening antique hinges and sometimes used for face-nailing floors. The head style is similar to a Boat Nail but Hinge Nails are made from a slightly lighter gauge of steel providing more nails per pound. Available in Standard Finish only.  All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts.

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Hinge Nails are ideal for fastening antique hinges and sometimes used for face-nailing floors. The head style is similar to a Boat Nail but Hinge Nails are made from a slightly lighter gauge of steel providing more nails per pound. Available in Standard Finish only.  All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts.

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Hinge Nails are ideal for fastening antique hinges and sometimes used for face-nailing floors. The head style is similar to a Boat Nail but Hinge Nails are made from a slightly lighter gauge of steel providing more nails per pound. Available in Standard Finish only.  All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts.

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Hinge Nails are ideal for fastening antique hinges and sometimes used for face-nailing floors. The head style is similar to a Boat Nail but Hinge Nails are made from a slightly lighter gauge of steel providing more nails per pound. Available in Standard Finish only.  All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts.

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Hinge Nails are ideal for fastening antique hinges and sometimes used for face-nailing floors. The head style is similar to a Boat Nail but Hinge Nails are made from a slightly lighter gauge of steel providing more nails per pound. Available in Standard Finish only.  All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts.

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Hinge Nails are ideal for fastening antique hinges and sometimes used for face-nailing floors. The head style is similar to a Boat Nail but Hinge Nails are made from a slightly lighter gauge of steel providing more nails per pound. Available in Standard Finish only.  All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts.

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Hinge Nails are ideal for fastening antique hinges and sometimes used for face-nailing floors. The head style is similar to a Boat Nail but Hinge Nails are made from a slightly lighter gauge of steel providing more nails per pound. Available in Standard Finish only.  All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts.

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Hinge Nails are ideal for fastening antique hinges and sometimes used for face-nailing floors. The head style is similar to a Boat Nail but Hinge Nails are made from a slightly lighter gauge of steel providing more nails per pound. Available in Standard Finish only.  All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts.

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

Hinge Nails are ideal for fastening antique hinges and sometimes used for face-nailing floors. The head style is similar to a Boat Nail but Hinge Nails are made from a slightly lighter gauge of steel providing more nails per pound. Available in Standard Finish only.  All our nails are made on original 19th century and early 20th century nail machines, this may lead to variation in head shape and slight differences in nail length. Tremont Nails are proudly manufactured and packaged in Mansfield Massachusetts.

Cut nails posses great durability. They are hard to pull out because the shape causes the wood fibers to push downward and wedge against the nails, greatly strengthening the holding power. Once you have used them you will prefer to use them for all of you projects. 

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.

The Glasgow Boat Nail is a reproduction of a boat nail that used to be made by Mustadfors Bruk in Västra Götaland, Sweden. Used throughout Scandinavia for traditional boat building and restoration projects, also called an Oakwood Nail, Ekspik, or Timmerspik. Boat Nails have a long-tapered shank and a slightly rounded head. The original Swedish nails were made from square wire, these nails are sheered from sheets of steel. All of our Boat nails are hot-dipped galvanized for rust protection. Glasgow Steel Nails were originally produced in Scotland until being purchased in 2013 by Tremont Nail Company. Please note that Glasgow Steel Nails are now sold by pound. Larger quantities and self-color by request only, please contact our sales team for prices and lead times.